Showing 129–135 of 135 results

Sale!

Waterpump Service Kit [Gates] – 1989-2005 Mazda Miata Water Pump 42134 42131

$52.99$54.99

Waterpump Service Kit [Gates] – 1989-2005 Mazda Miata Water Pump 42134 42131
$89.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

Don’t settle for any less! A lot of aftermarket water pumps are cheaply made. They use paddle-like impellers that don’t move as much coolant as these can.
 
This is the waterpump of choice! Do a search and see for yourself. Numerous road racers around the world have picked this affordable and yet quality pump to go into their Miatas!
 
 
Gates aftermarket kits are really affordable and great quality:
 
These kits include:
Waterpump (with 3d cast impeller)
Main Water Pump Gasket
Side Exit Gasket
Hardline O-Ring

Windblocker [ Project-G ] – 1990-2005 Mazda Miata

$40.00

Project-G Windblocker for NA/NB
$52 MSRP

Application:
Mazda Miata 89-05 (NA/NB)

Description:
Our windblocker actually works wonderfully with our G-String Premium Bikini Tops. These windblockers keep the heater in at night, and ac during the day. The windblocker helps eliminate the annoying back draft while making the ride more enjoyable. The back draft is caused by a vacuum or low pressure zone that is created when wind flows over the windshield as well as over your head.

This finished piece enhances the look of the car. It’s a very elegant way to display a logo or decal as well. Illuminating it is another possibility. Our windblocker affixes on to the factory seatbelt brace, but you may be able to retrofit it onto a harness bar.

• Helps eliminate back draft
• Reduces wind noise
• Keeps comfortable temperatures inside
• Prime decal location

 1 – Clear Windblocker
2 – Velcro Straps With Ring
Decals

 

Sale!
Out Of Stock

Wood Grain Shift Knob (Threaded) – 1989-2005 Mazda Miata

$49.99 $29.99

Wood Grain Shift Knob
$49.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

Wood Grain shift knob that is a direct fit for 1st and 2nd generation Mazda Miatas. This does not require any customization since it is threaded and designed for the car. Beautiful wood grain gives your roadster a classic look.

Woodruff Key for Timing Gear (Crankshaft)- 1991-2005 Mazda Miata B3C7-11-317

$8.49

Woodruff Key for Timing Gear (Crankshaft)- 1991-2005 Mazda Miata B3C7-11-317
$7.99

Application:
Mazda Miata 1991-2005
*See below information if you have a 1991

Description:

This is a genuine Mazda part. This part is to be replaced every time you do your timing belt. A lot of people don’t keep up with this part which can cause play on your crank.

 

1991(SPLIT YEAR, The 2nd half of production is LONG NOSE CRANK).
*this will not fit Short Nose Crank (SNC). If your car is a 1991, count the number of slots on your crank pulley. If it has 4, it is SNC, if it has 8, it is LNC

Works Bell Boss Steering Wheel Hub (70mm) – 1990-2014 Mazda Miata

$149.99

Works Bell Standard Steering Wheel Hub 70mm
$139

Application: (AIRBAG EQUIPPED VEHICLES FROM FACTORY)
Mazda Miata 89-97 (NA), Mazda Miata 99-05 (NB), Mazda Miata 06-14(NC)

Description:

Check out the SHORTHUB if you want to run a quick release.
This standard length hub is 75mm, short hubs are only 50mm

This is the most famous original boss hub company from Japan. Works Bell has an awesome history of great quality as well as price. These hub boss kits will let you install an aftermarket wheel on your car without major modification or permanent damage to your car.Its fully reversible, and even comes with the air bag defeat.

 
-Best quality hub made for Miata (FULL CNC ALUMINUM, NO WELDS)
***OVER TORQUE DURING INSTALLATION MAY CAUSE PERMANENT DAMAGE TO THIS HUB
-Looks great
-Perfect fit
-Easy to install!
-Plug and play version with Airbag defeat(cancels srs light)
-Reversible
-Includes horn ring(optional use)
-Includes hardware and tool
=======================================
Product information
Universal Hub Kit is the product to pass Japanese automobile safety inspection. Now in the automobile parts industry, it occurs to loosen the automobile discipline and advance free. But it needs for customer to choice the correct products. For example, it is obliged that the automobile safety is under management for customer. It is no easy
that choose goods correctly among huge market. So it advances free, in WORKS BELL we willingly decided our goods to pass Japanese automobile safety inspection. We review what boss should be using data about know-how, strength and safety we save, to guarantee the quality of our products. 
For example, the accuracy and shape of boss to fix steering wheel surely, the possibility of secondary damage by the cause a driver crash against a steering wheel in an accident and the material to extend its life through attention of corrosion and fatigue, etc. We don’t change its design again, but develop its traditional design as self regulations. Our products have high quality and design so that it could relieve you. This is a Universal Hub Kit produced by WORKS BELL to pass Japanese automobile safety inspection.
 
Airbag BOSS
You can detach airbag that rises a rate of attachment in recent years, and attach a steering wheel as you like. In use of dummy resistance that attaches Universal Hub Kit for airbag, you can turn off the airbag indicator. 
 
※Some car can’t turn off the airbag indicator
**REMOVAL OR SRS EQUIPMENT SUCH AS AIRBAG MAY BE ILLEGAL IN YOUR AREA, PLEASE VERIFY THIS FOR STREET USE, THIS IS FOR OFFROAD USE.

Works Bell Rapfix II Quick Release – For Steering Wheel Hubs

$339.99$349.99

Works Bell Rapix II Quick Release
$399.99

Application: UNIVERSAL
Momo/NRG Pattern (You can use the NRG Spacer to change the bolt pattern if necessary)

Description:

*This is ONLY a quick release, you still need a HUB to run this!
 
Product Information
Since salling, this product has been a big seller because of its factor in fine convinience and reliability which it suits for Japanese automobile inspection.
* This must not be shaky when it has set steering wheel.
* There is no mistake in attachment if you install it at an angle with no attention because it would be fixxed at top position.
* You can attach or detach horn wiring and steering wheel at one-step with one button.
* This has 3 colour variations what you can choose a colour as you like.
* In summer, the body would be heated much by the direct rays of the sun. Attention a burn.
Besides these feature,the newest model RAPFIX2 has released that it has realized a one-step attach and detach and weight reduction.
 
**REMOVAL OF SRS EQUIPMENT SUCH AS AIRBAG MAY BE ILLEGAL IN YOUR AREA, PLEASE VERIFY THIS FOR STREET USE, THIS IS FOR OFFROAD USE.

Works Bell Short Steering Wheel Hub (50mm) – 1990-2005 Mazda Miata

$199.00

Works Bell Short Steering Wheel Hub (50mm)
$199

Application:
(AIRBAG EQUIPPED VEHICLES FROM FACTORY)
Mazda Miata 89-97 (NA), Mazda Miata 99-05 (NB)

Description:

Check out the Standard if you are not going to run quick release or spacer.
(TOO SHORT MIGHT CAUSE YOUR HANDS TO HIT THE SIGNAL STALK)

This standard length hub is 75mm, short hubs are only 50mm

 

This is the short hub that started it all! 

Works Bell of Japan created this short boss steering wheel hub especially for use with their popular Rapfix Quick Release Adapter. Great combo to keep extension minimal.
 
Comes in MOMO pattern only (designed to use with QUICK RELEASE which usually has multi pattern)
*You can use the NRG Spacer Adapter to Convert for Nardi use
 
-Best quality hub made for Miata 
-Shorter than regular to accommodate quick release without sacrificing space
-Looks great
-Perfect fit
-Easy to install!
-Plug and play version with Airbag defeat(cancels srs light)
-Reversible
-Includes horn ring(optional use)
-Includes hardware
=======================================
Product information
Universal Hub Kit is the product to pass Japanese automobile safety  inspection. Now in the automobile parts industry, it occurs to loosen the automobile discipline and advance free. But it needs for customer to choice the correct products. For example, it is obliged that the automobile safety is under management for customer. It is no easy that choose goods correctly among huge market. So it advances free, n WORKS BELL we willingly decided our goods to pass Japanese automobile safety inspection. We review what boss should be using data about know-how, strength and safety we save, to guarantee the quality of our products.For example, the accuracy and shape of boss to fix steering wheel surely, the possibility of secondary damage by the cause a driver crash against a steering wheel in an accident and the material to extend its life through attention of corrosion and fatigue, etc. We don’t change its design again, but develop its traditional design as self regulations. Our products have high quality and design so that it could relieve you. This is Universal Hub Kit produced by WORKS BELL to pass Japanese automobile safety inspection.
 
Airbag BOSS
You can detach airbag that rises a rate of attachment in recent years, and attach a steering wheel as you like. In use of dummy resistance that attaches Universal Hub Kit for airbag, you can turn off the airbag indicator. 
 
※Some car can’t turn off the airbag indicator
**REMOVAL OR SRS EQUIPMENT SUCH AS AIRBAG MAY BE ILLEGAL IN YOUR AREA, PLEASE VERIFY THIS FOR STREET USE, THIS IS FOR OFFROAD USE.