Showing 97–112 of 135 results

Sale!

Reverse Lights or NB 3rd Brake OEM Replacement 1156 Light Bulbs 2-Pack – 1989-2005 Mazda Miata

$3.99 $2.99

Reverse Lights or NB 3rd Brake OEM Replacement 1156 Light Bulbs 2-Pack – 1989-2005 Mazda Miata
$3.99

Application:
Mazda Miata 89-97 (NA) as REVERSE BULBS OR 3rd Brake Light for NB (99-05)

Description:

This is a replacement single filament light bulb for your reverse lights on your tail lights OR 3rd brake light bulb on NB’s. Sometimes it’s hard to find this exact fitment at your local parts stores.

Out Of Stock

Reverse OEM Radio Headunit Harness Pigtail 1989-2001 Mazda Miata (Car Side) [Metra] 71-7901

$12.99

Reverse OEM Radio Headunit Harness Pigtail 1989-2001 Mazda Miata [Metra] 71-7901

Application:

1989-1993 NA6 Mazda Miata
1994-1997 NA8 Mazda Miata
2001-2005 NB2 Mazda Miata (First Half)

Description:

This is a reverse harness(CHASSIS/CAR) side. Many of us purchase a 2nd hand roadster and go to work on the radio only to realize somebody butchered their factory harness. This is the factory chassis side harness. It will bring your car back to the way it came from the factory. This is a must have for anyone who has shady wires behind their radio.

Reverse OEM Radio Headunit Harness Pigtail 2001-2005 Mazda Miata (Car Side) [Metra] 71-7903

$12.99

Reverse OEM Radio Headunit Harness Pigtail 2001-2005 Mazda Miata [Metra] 71-7903

Application:

2001-2005 NB2 Mazda Miata

Description:

This is a reverse harness(CHASSIS/CAR) side. Many of us purchase a 2nd hand roadster and go to work on the radio only to realize somebody butchered their factory harness. This is the factory chassis side harness. It will bring your car back to the way it came from the factory. This is a must have for anyone who has shady wires behind their radio.

Rubber Replacement Clutch / Brake Pedal Pad (Genuine Mazda) – 1989-2005 Mazda Miata B092-43-028

$7.99

Rubber Replacement Clutch / Brake Pedal Pad (Genuine Mazda) – 1989-2005 Mazda Miata B092-43-028
$9.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

This is a genuine Mazda part. It is a brake pedal or clutch pedal rubber pad replacement. Most of ours are probably ripped from the years of use. Replacement this can prevent an accident and provide a dramatic aesthetic upgrade. Sold as a single piece. You will need to order 2 if you wish to switch BOTH pedals.

Sale!
Out Of Stock

RyokuRob Front Tow Hook – BLUE 1989-2005 Mazda Miata [RyokuRob]

$64.99 $49.99

RyokuRob Front Tow Hook – BLUE 1989-2005 Mazda Miata [RyokuRob]

$75 MSRP

Application:
Mazda Miata 89-05 (NA/NB)

Description:
To be used in place of factory “baby-teeth hook” (shipping straps). These 6061 Aluminum Tow Hooks are a must have in terms on functionality and aesthetics.

Comes without hardware(reuse stock hardware)

1 – Tow hook (can be used on either side of bumper)

Sale!
Out Of Stock

RyokuRob Front Tow Hook – GOLD (ETCHLESS) 1989-2005 Mazda Miata [RyokuRob]

$64.99 $59.99

RyokuRob Front Tow Hook – GOLD 1989-2005 Mazda Miata [RyokuRob]

$75 MSRP

Application:
Mazda Miata 89-05 (NA/NB)

Description:
To be used in place of factory “baby-teeth hook” (shipping straps). These 6061 Aluminum Tow Hooks are a must have in terms on functionality and aesthetics.

Comes WITH hardware(washers and bolts)

1 – Tow hook (can be used on either side of bumper)

Sale!
Out Of Stock

RyokuRob Front Tow Hook – PINK (ETCHED) 1989-2005 Mazda Miata [RyokuRob]

$64.99 $59.99

RyokuRob Front Tow Hook – PINK 1989-2005 Mazda Miata [RyokuRob]

$75 MSRP

Application:
Mazda Miata 89-05 (NA/NB)

Description:
To be used in place of factory “baby-teeth hook” (shipping straps). These 6061 Aluminum Tow Hooks are a must have in terms on functionality and aesthetics.

Comes WITH hardware(washers and bolts)

1 – Tow hook (can be used on either side of bumper)

Sale!
Out Of Stock

RyokuRob Front Tow Hook – PINK 1989-2005 Mazda Miata [RyokuRob]

$64.99 $49.99

RyokuRob Front Tow Hook – PINK 1989-2005 Mazda Miata [RyokuRob]

$75 MSRP

Application:
Mazda Miata 89-05 (NA/NB)

Description:
To be used in place of factory “baby-teeth hook” (shipping straps). These 6061 Aluminum Tow Hooks are a must have in terms on functionality and aesthetics.

Comes without hardware(reuse stock hardware)

1 – Tow hook (can be used on either side of bumper)

Sale!
Out Of Stock

RyokuRob Front Tow Hook – PURPLE (ETCHLESS) 1989-2005 Mazda Miata [RyokuRob]

$64.99 $59.99

RyokuRob Front Tow Hook – PURPLE 1989-2005 Mazda Miata [RyokuRob]

$75 MSRP

Application:
Mazda Miata 89-05 (NA/NB)

Description:
To be used in place of factory “baby-teeth hook” (shipping straps). These 6061 Aluminum Tow Hooks are a must have in terms on functionality and aesthetics.

Comes WITH hardware(washers and bolts)

1 – Tow hook (can be used on either side of bumper)

Sale!
Out Of Stock

RyokuRob Front Tow Hook – RED (ETCHLESS) 1989-2005 Mazda Miata [RyokuRob]

$64.99 $49.99

RyokuRob Front Tow Hook – RED 1989-2005 Mazda Miata [RyokuRob]

$75 MSRP

Application:
Mazda Miata 89-05 (NA/NB)

Description:
To be used in place of factory “baby-teeth hook” (shipping straps). These 6061 Aluminum Tow Hooks are a must have in terms on functionality and aesthetics.

Comes without hardware(reuse stock hardware)

1 – Tow hook (can be used on either side of bumper)

Sharka’s Vent Rings Accents [RevLimiter] – 1989-2005 Mazda Miata

$39.99

Sharka’s Vent Rings [RevLimiter] – 1989-2005 Mazda Miata
Polished, Gloss Black, Satin Black, Vintage White, Brushed Silver, Gold
MSRP $39.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

Direct fitment, no drilled or customization. 100% reversible trim accents for your 4 vents.
Comes in sets of 4.

  • These were first available as the legendary MRoad Vent Rings and are reproduced by permission.
  • Fits both NA and NB Miatas. That’s all Roadsters from 1989-2005.
  • Polished aluminum is the most popular. They’re shiny but not too shiny.
  • Aluminum trim rings with powdercoated finish.
  • No adhesive materials included. But they easily attach with your favorite brand of clear silicon or double sided tape.
  • Includes installation guide.

Shift & Hand Brake Premium Leather Boots [ Project-G ] – 1989-2005 Mazda Miata

$48.00$96.00

Check out RevLimiter’s Review(Lots of photos)

 

Project-G Premium Leather Shift & Hand Brake Boots for NA/NB
$75 MSRP each or $140MSRP set

Application:
Mazda Miata 89-05 (NA/NB)

Description:

Project-G has chosen a very fine leather used in some of the most prestigious vehicles in the world as a direct replacement to the OEM vinyl shift boot. This, combined with the quality stitching used in the G-String product line has produced an elegant yet bold, authentic leather shift boot, while still maintaining an affordable price point comparable to its OEM counterpart. This shift boot does not require the installation of the top retainer as some of the others do. Just replace your old boot, install the new, and get shifting in style.

• Direct factory replacement
• Installs in minutes
• No need to glue OEM ring retainer
• Genuine Premium Leather (factory is vinyl)
• Very high grade to compliment Italian Steering Wheels

NA 1990-1997 (4-Panel Shiftboot)
NB 1999-2005 (2-Panel Shiftboot)
Handbrake (2-Panel Fitted Handbrake)

Shifter Rebuild Kit (Genuine 7 Piece Mazda) – 1989-2005 Mazda Miata

$99.99

Shifter Rebuild Kit (Genuine 7 Piece Mazda) – 1989-2005 Mazda Miata
MSRP $132.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

Most Miata’s on the road have torn boots/ parts and don’t know it. Once 

these parts are replaced, they make a world of difference!

 
 
The inner boot (also known as the turret seal) seals the shifter onto the transmission. It keeps gear oil from coming out and 
destroying the big boot as well as gear oil odor. 
 
The outer boot(the big one) keeps the heat and noise out of the cabin. This boot always fails when the smaller one is bad, the oil gets on this boot
and deteriorates it.
The various other parts have been used and shifted into gears thousands of times. Sometimes, it can cause a miss-shift, or even failure to get it into gear.

Usually with this common 7-Piece rebuild kit, it will make the world of difference.

These are 100% Genuine Mazda Parts. All Made in Japan. Don’t pay the same cash for china made parts, or other aftermarket parts. This kit is a must for anyone
trying to restore their Miata!
 
*The shifter tip varies in the later 6-speed, make sure you select the appropriate model car you have.
Sale!

Skunk2 Pro Series 64mm Throttle Body – 1994-2005 1.8L Mazda Miata

$399.00 $299.00

Skunk2 Pro Series 64mm Throttle Body – 1994-2005 1.8L Mazda Miata
$400 MSRP

Application:

Mazda Miata 94-97 (NA8) 1.8L

Mazda Miata 99-00 (NB1) 1.8L (VICS)

Mazda Miata 01-05 (NB2) 1.8L (VVT)

Description:

Skunk2’s 64mm Pro Series Throttle Body is now available for the Miata in their  exclusive, hard anodized finish. These high quality throttle bodies are quite larger than stock. They provide a lot more air flow as well as a very stylish design. These should directly fit on to your car. This is not a CARB exempt piece.

Stock Throttle Body is 56mm vs Skunk2 Pro Series is a beefy 64mm.

This throttle body will not add power until your build is above about 175whp. It can be installed to help prevent shaft failures that are common with the OEM body in sustaind use near 7000rpm.

Inlet pipe is 2.715″ O.D.

Skunk2 is proud to introduce its 64mm Pro Series Throttle Body for the ’94-’97 and ’99-’05 Mazda Miata in its exclusive, hard anodized finish. Skunk2’s 64mm Pro Series Throttle Body is designed to be used with the OEM intake manifold for bolt-on horsepower and torque gains by maximizing engine airflow.
 
Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesn’t just provide more flow but retains smooth drivability and OEM throttle characteristics. Each Pro Series Throttle Body is designed using the latest CAE (Computer Aided Engineering) tools, which results in a unit that exceeds industry standards. Pro Series Throttle Bodies are also CNC machined from forged, billet 6061-T6 aluminum and hard anodized for durability in Skunk2’s signature finish. Pro Series Throttle Bodies are also compatible with OEM throttle cables, which simplifies installation. Each Skunk2 Pro Series Throttle body also features sealed bearings for smooth operation and ultra-strong, upgraded shafts for ultimate durability. All necessary hardware and a new throttle body gasket are included for trouble-free installation.
 
A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2’s Pro Series Throttle Bodies for Miatas feature a large, 64mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones.

SIZE NOTES: The stock Miata throttle body is 55mm, but stock Miata manifolds are about 59mm. This TB’s 64mm opening has about 18% more cross sectional area than the OEM 59mm manifold opening and about 18% less cross sectional area than a typical 2.75″ (70mm) Miata cold air intake pipe. Thus, this TB’s 64mm ID provides a nice even flow transition going from intake pipe (70mm), to TB (64mm), then to OEM intake manifold (59mm). The upgraded Miata throttle body size of 64mm inner diameter works especially well with the less restrictive JDM flat top miata manifold (also 59mm opening).

-64mm Size
-Gaskets
-Adapter plate & hardware for IACV(if needed)
-Easy to install!
-Plug and play no permanent modifications needed
-Reversible
-Sealed bearings
Sale!
Out Of Stock

Skunk2 Ultra Street Intake Manifold (Expandable) – 1994-2005 Mazda Miata

$384.99$640.00

**** INVENTORY UPDATE, SKUNK2 IS SOLD OUT AND NEXT BATCH ETA IS JUNE 2018 ***

Skunk2 Ultra Street Intake Manifold – 1994-2005 1.8L Mazda Miata
MSRP 419.99 / Select Pro Series Combo to Save more!

*Product is shipping NOW! First batch is almost completely sold out.

Application:

Mazda Miata 94-97 (NA8) 1.8L

Mazda Miata 99-00 (NB1) 1.8L (VICS)

Mazda Miata 01-05 (NB2) 1.8L (VVT)

Description:

Finally! THE TIME HAS COME FOR AN AFFORDABLE MANIFOLD SOLUTION! ARE YOU TIRED OF PAYING $450 for some used parts from Japan? New from Mazda is $700. This manifold not only looks better, but it offers a lot of expandability. We have been running this manifold on our Red NA which is also running the Skunk2 Pro Series Throttle Body as well as the Kraftwerks Supercharger Kit.  We obtained 11whp by just adding this manifold to the car’s setup.

Skunk 2:

The Skunk2 Racing high performance intake manifold for the NA and NB Miata’s has arrived (1.8L). The unique 2-piece design modular manifold has been designed to be a bolt on replacement for the anemic OEM unit, incorporating a removable plenum lid that allows for easy disassembly, porting, and plenum volume changes through the use of our optional plenum spacers. The Skunk2 Racing Ultra Street Intake Manifold has undergone extensive in-house dyno testing and has shown consistent torque and horsepower gains on HOT N/A builds and all supercharged/turbocharge set-ups.

  • Modular 2pc Design with Removable 1.8L Plenum
  • Unique Mounting Flange Universally fits 1.8L NA/NB (Dual Pattern of Holes)
  • 66mm Throttle body opening
  • Fits ALL popular chassis configurations (not just race cars)
  • Eliminants obstructive VICS and VTS butterflies
  • Tapped with 1/8″ NPT, 1/4″ NPT and 10mm threads for accessories
  • Includes Thermal Intake Gasket and Throttle Cable Bracket
  • Tapered 10.00″ Long High-Velocity Runners with Raised Velocity Stack Entries.
  • Weighs Approx. 13lbs

More information coming soon.

Smoke Bumper Markers (SMOKED) – 1990-2005 Mazda Miata

$39.99

Smoke Bumper Markers for NA/NB
$50

Application:
Mazda Miata 89-05 (NA/NB)

Description:

Meets or exceeds DOT & SAE standards. 100% Street Legal. Produced by DEPO

Exact replacement for factory assembly. Can be used on the FRONT or REAR bumper
Includes:
2 x Housing replacements (1 x Left & 1 x Right)