Skunk2 Pro Series 64mm Throttle Body – 1994-2005 1.8L Mazda Miata
$399.00 $299.00
Skunk2 Pro Series 64mm Throttle Body – 1994-2005 1.8L Mazda Miata
$400 MSRP
Application:
Mazda Miata 94-97 (NA8) 1.8L
Mazda Miata 99-00 (NB1) 1.8L (VICS)
Mazda Miata 01-05 (NB2) 1.8L (VVT)
Description:
Skunk2’s 64mm Pro Series Throttle Body is now available for the Miata in their exclusive, hard anodized finish. These high quality throttle bodies are quite larger than stock. They provide a lot more air flow as well as a very stylish design. These should directly fit on to your car. This is not a CARB exempt piece.
Stock Throttle Body is 56mm vs Skunk2 Pro Series is a beefy 64mm.
This throttle body will not add power until your build is above about 175whp. It can be installed to help prevent shaft failures that are common with the OEM body in sustaind use near 7000rpm.
Inlet pipe is 2.715″ O.D.
SIZE NOTES: The stock Miata throttle body is 55mm, but stock Miata manifolds are about 59mm. This TB’s 64mm opening has about 18% more cross sectional area than the OEM 59mm manifold opening and about 18% less cross sectional area than a typical 2.75″ (70mm) Miata cold air intake pipe. Thus, this TB’s 64mm ID provides a nice even flow transition going from intake pipe (70mm), to TB (64mm), then to OEM intake manifold (59mm). The upgraded Miata throttle body size of 64mm inner diameter works especially well with the less restrictive JDM flat top miata manifold (also 59mm opening).
Additional information
Weight | N/A |
---|---|
Dimensions | N/A |
Car Model | 1994-1997 1.8L Mazda Miata NA8, 1999-2000 1.8L (VICS) Mazda Miata NB1, 2001-2005 1.8L (VVT) Mazda Miata NB2 |
You must be logged in to post a review.
Reviews
There are no reviews yet.