Showing 17–32 of 53 results

Sale!
Out Of Stock

Heater Core Firewall Grommets (Genuine Mazda) 2-Pack – 1989-2005 Mazda Miata 8871-61-219A

$19.99 $17.99

Heater Core Firewall Grommets (Genuine Mazda) – 1989-2005 Mazda Miata 8871-61-219A
$19.99 (2-Pack)

Application:
Mazda Miata 89-05 (NA/NB)

Description:

This is a genuine Mazda part. This is the grommet that protects the heater core from wearing a hole through the hard lines that protrude through the firewall. A lot of people have removed or reinstalled their heater cores and not switching these grommets can cause some huge issues. These help the heater core lines stay in the center of the hole and not letting it wear a hole in itself.

Sale!

IACV Idle Air Valve Seal Gasket – 1999-2005 Mazda Miata BP2Y-13-W89

$32.99 $27.99

IACV Idle Air Valve Seal Gasket – 1999-2005 Mazda Miata BP2Y-13-W89
$32.99

Application:
Mazda Miata 99-05 (NB)

Description:

This is a genuine Mazda part. As these cars get old, some of these places will leak. This gasket goes on your throttle body. It seals the IACV which controls your idle. A bad seal can cause a bad idle.

Injector O-Ring Gasket – 1989-2005 Mazda Miata 8574-13-253

$5.99

Injector O-Ring Gasket – 1989-2005 Mazda Miata 8574-13-253
$5.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

This is a genuine Mazda part. As these cars get old, some of these places will leak. These O-Rings can be the cause of that gas smell under the engine bay. These should not be re-used! Your car will require more than 1, order accordingly.

Sale!

K&N Air Filter Replacement (Drop In Element) REUSABLE – 1989-2005 Mazda Miata 33-2676 33-2034

$59.99 $47.99

K&N Air Filter Replacement (Drop In Element) REUSABLE – 1989-2005 Mazda Miata 33-2676 33-2034
$59.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

These air filters flow much more air than the factory paper filters. Also, these are reusable, K&N offers a cleaning and reoil kit that will make this filter be the last one you have to buy for your car.

This is an oem replacement air filter. Comes ready to use. REMEMBER! You air filter needs to be changed every 15,000 miles. Don’t forget at 30,000 miles to change plugs, air filter, and fuel filter.

  • Designed to boost horsepower and rate of acceleration
  • Can be cleaned and used again
  • High air flow with exceptional filtration
  • Lasts up to 50,000 miles before cleaning is required depending on driving conditions
  • Works with original equipment manufacturer vehicle electronics
  • Emissions legal in all 50 US states
  • Will NOT void vehicle warranty
  • Million Mile Limited Warranty®

The K&N 33-2034 Air Filter fits some Eunos 100, Ford Escort, Ford Escort GT, Hyundai Excel, Kia Sephia, Mazda 323, Mazda 323 IV, Mazda Familia, Mazda Miata, Mazda MX-5 I, Mazda Protege, and Mercury Tracer models. See vehicle applications link for details.

K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for the majority of vehicles on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be the last air filter your vehicle will ever need.

Koyo Aluminum Radiator 37mm – 1989-2005 Mazda Miata

$310.00

Koyo 37mm V-Series Direct Fit Aluminum Radiator – 1989-2005 Mazda Miata
MSRP $359.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

These Koyo radiator units are completely plug and play with all OEM hardware and thicker aftermarket sway bars! Koyo smartly designed their Miata radiator to take the factory cap, factory fans and even the factory plug.
37mm Aluminum Racing features same almost the same size as the factory one, but with far superior cooling. The entire radiator is aluminum(no easy to break plastic)

Koyo Offers the best in Quality and Fitment
Koyo leads the radiator industry in quality, performance, fitment, and extensive list of vehicle applications. Our quality begins with the careful testing in our R&D department, then to the manufacturing in Koyo’s privately owned ISO 9001 certified factories, and finally to our class leading packaging. This process assures that each Koyo OE aftermarket replacement radiator arrives safely and performs perfectly in the hands of the shop and end user. Our engineers carefully design our radiators offering a true plug and play installation: No drilling, cutting, relocating, or stretching
to get our radiators to fit properly. When you buy a Koyo radiator, you will receive a component that has been engineered to the highest standards.

Koyo Saves Installers Time and Money
Do you value your time? Koyo does! When installing radiators of lesser quality, consider the potential increase in defect rate and the overall impact this may have on your business. Aside from the cost of replacing defective radiators and absorbing these additional labor costs, how much will it take to restore your customer’s trust? This wasted time and money may very well have been spent maintaining and seeking brand new business. Koyo radiators are renowned for the best in quality and fit and finish meeting or exceeding OE standards, resulting in the highest rate of reliability and overall savings in the marketplace. Buying a Koyo Radiator ensures your business’s success and longevity. You cannot buy, sell, install or own a better radiator.

Multi-fit Combination Radiators
Koyo not only saves you time and money, but valuable warehouse space as well. Because Koyo manufactures our own radiators in our privately owned factories, we have the ability to react quickly to market changes. Our Engineering Department continuously seeks to make radiator consolidations by upgrading existing radiators and enabling them to fit additional model years and applications. Koyo combines multiple radiators into one, reducing warehouse storage space which allows our customers to stock additional applications. More vehicle coverage and compatibility
will result in increased sales.

Koyo Aluminum Radiator 53mm (X-Large) – 1989-2005 Mazda Miata

$360.00

Koyo Aluminum Radiator 53mm (X-Large) – 1989-2005 Mazda Miata
MSRP $429.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

These Koyo radiator units are completely plug and play with all OEM hardware and thicker aftermarket sway bars! Koyo smartly designed their Miata radiator to take the factory cap, factory fans and even the factory plug.

This JUMBO 53mm is their thickest radiator offering quite a big more coolant capcity over their 37mm counter part.

Koyo Offers the best in Quality and Fitment
Koyo leads the radiator industry in quality, performance, fitment, and extensive list of vehicle applications. Our quality begins with the careful testing in our R&D department, then to the manufacturing in Koyo’s privately owned ISO 9001 certified factories, and finally to our class leading packaging. This process assures that each Koyo OE aftermarket replacement radiator arrives safely and performs perfectly in the hands of the shop and end user. Our engineers carefully design our radiators offering a true plug and play installation: No drilling, cutting, relocating, or stretching
to get our radiators to fit properly. When you buy a Koyo radiator, you will receive a component that has been engineered to the highest standards.

Koyo Saves Installers Time and Money
Do you value your time? Koyo does! When installing radiators of lesser quality, consider the potential increase in defect rate and the overall impact this may have on your business. Aside from the cost of replacing defective radiators and absorbing these additional labor costs, how much will it take to restore your customer’s trust? This wasted time and money may very well have been spent maintaining and seeking brand new business. Koyo radiators are renowned for the best in quality and fit and finish meeting or exceeding OE standards, resulting in the highest rate of reliability and overall savings in the marketplace. Buying a Koyo Radiator ensures your business’s success and longevity. You cannot buy, sell, install or own a better radiator.

Multi-fit Combination Radiators
Koyo not only saves you time and money, but valuable warehouse space as well. Because Koyo manufactures our own radiators in our privately owned factories, we have the ability to react quickly to market changes. Our Engineering Department continuously seeks to make radiator consolidations by upgrading existing radiators and enabling them to fit additional model years and applications. Koyo combines multiple radiators into one, reducing warehouse storage space which allows our customers to stock additional applications. More vehicle coverage and compatibility
will result in increased sales.

Koyo OEM Replacement Radiator – 1989-2005 Mazda Miata

$169.99

Koyo OEM Replacement Radiator – 1989-2005 Mazda Miata
MSRP $249.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

These Koyo radiator units are completely plug and play with all OEM hardware and thicker aftermarket sway bars! Koyo smartly designed their Miata radiator to take the factory cap, factory fans and even the factory plug.

This is Koyo’s OEM replacement radiator for cars with the manual transmission. Koyo has an outstanding reputation for providing the automotive consumer with a radiator that is reliable, offers optimal cooling, and has factory fit and finish.

These are great for stock cars, to lightly modified. These feature plastic end tanks with an aluminum core. These are a very cost effective option in comparison to OEM units.

Multi-fit Combination Radiators
Koyo not only saves you time and money, but valuable warehouse space as well. Because Koyo manufactures our own radiators in our privately owned factories, we have the ability to react quickly to market changes. Our Engineering Department continuously seeks to make radiator consolidations by upgrading existing radiators and enabling them to fit additional model years and applications. Koyo combines multiple radiators into one, reducing warehouse storage space which allows our customers to stock additional applications. More vehicle coverage and compatibility
will result in increased sales.

Sale!
Out Of Stock

Mass Air Flow Gasket – MAF Cork Seal – 1989-1993 Mazda Miata B6S7-13-211A

$15.99 $12.99

Mass Air Flow Gasket – MAF Seal – 1989-1993 Mazda Miata B6S7-13-211A
$19.99

Application:
Mazda Miata 1989-1993

Description:

This is a genuine Mazda part. As these cars get old, some of these places will leak. This gasket goes on the mass air flow sensor(to the intake). This is a special cork material seal which helps heat soak.

Mazda Genuine Shifter Insulator Rubber Boot (Outer) – 1989-2005 Mazda Miata – NA01-64-481B

$29.99

Mazda Genuine Shifter Insulator Rubber Boot (Outer) – 1989-1997 Mazda Miata
NA01-64-481B

MSRP $32.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

Most Miata’s on the road have torn boots and don’t know it. Once these boots are replaced, they make a world of difference!

 
The big boot keeps out a lot of heat while sealing a big open area on the transmission tunnel. The inner boot (also known as the turret seal) seals the shifter onto the transmission. It keeps gear oil from coming out and destroying the big boot as well as gear oil odor. 
 
Changing both at the same time is recommended but not necessary, a torn inner boot is known to cause the big boot to deteriorate. 
 
These are 100% Genuine Mazda Parts. 

Mazda Genuine Shifter Insulator Rubber Boot Seal (Inner) – 1989-2005 Mazda Miata – R501-17-47Z

$29.99

Mazda Genuine Shifter Insulator Rubber Boot Seal (Inner) – 1989-2005 Mazda Miata
R501-17-47Z
MSRP $32.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

Most Miata’s on the road have torn boots and don’t know it. Once 

these boots are replaced, they make a world of difference!

 
The inner boot (also known as the turret
seal) seals the shifter onto the transmission. It keeps gear oil from
coming out and destroying the big boot as well as gear oil odor. 
 
Changing both at the same time is recommended but not necessary,
a torn inner boot is known to cause the big boot to deteriorate. 
 
These are 100% Genuine Mazda Parts. 

Miata Shifter Insulator Carpet (Main) – 1989-2005 Mazda Miata

$5.99

Miata Shifter Insulator Carpet (Main) – 1989-1997 Mazda Miata
MSRP $6

Application:
Mazda Miata 89-05 (NA/NB)

Description:

Genuine Mazda Part:

This carpet is often forgotten about when maintenance is done. It keeps
a lot of the heat out of the shifter console area. This carpet breaks down when oil leaks and gets onto the carpet.
Includes:
-Main Carpet Insulation
Sale!

Mishimoto 55mm Aluminum Radiator – 1989-2005 Mazda Miata

$239.99

Mishimoto 55mm Aluminum Radiator – 1989-2005 Mazda Miata
MSRP $329.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

Cool your car down with one of the industry’s leading radiators. Best bang for the buck
with a lifetime warranty is what they’re known for. Their radiators includes a new cap.
They are fully aluminum to provide superior cooling and durability. This beefy oversized radiator retains all original fans and functions. NO DRILLING OR CUSTOMIZATION necessary. It is 100% an OEM fit.

Mishimoto Description:
By replacing your current Miata radiator with a Mishimoto performance aluminum radiator you will undoubtedly notice a cooler more efficient running engine. All Mishimoto Mazda Miata performance aluminum radiators are designed and engineered to maximize cooling efficiency, protect your car from the overheating, and boost overall engine functions. With its lightweight dual core, 100% brazed aluminum, and polished tank ends installing a direct OEM fit Mishimoto radiator is effortless, no cutting or modification is required. All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty

LIFETIME WARRANTY
Mishimoto Performance (MP), warrants all of its products under its ‘no questions asked’ limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer.

A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.

The purchaser’s remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid.
MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products.

ACCIDENT PROTECTION
Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.

FITMENT DISCLAIMER
All Mishimoto products are engineered to fit with OEM applications, as well as other Mishimotoproducts.

Includes:
-Mishimoto 55mm 2-Row Radiator
-Mishimoto Radiator Cap
-Magnetic Drain Plug
-Limited Lifetime Warranty

Sale!

Mishimoto X-Line 3-Row Aluminum Radiator – 1989-1997 Mazda Miata

$329.00 $309.99

Mishimoto X-Line 3-Row Aluminum Radiator – 1989-2005 Mazda Miata
MSRP $329.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

The X-Line series for the 90-97 provides you with an extra row of cooling(3 row instead of 2)

Cool your car down with one of the industry’s leading radiators. Best bang for the buck with a lifetime warranty is what they’re known for. Their radiators includes a new cap. They are fully aluminum to provide superior cooling and durability. This beefy oversized radiator retains all original fans and functions. NO DRILLING OR CUSTOMIZATION necessary. It is 100% an OEM fit.

Mishimoto Description:
By replacing your current Miata radiator with a Mishimoto performance aluminum radiator you will undoubtedly notice a cooler more efficient running engine. All Mishimoto Mazda Miata performance aluminum radiators are designed and engineered to maximize cooling efficiency, protect your car from the overheating, and boost overall engine functions. With its lightweight dual core, 100% brazed aluminum, and polished tank ends installing a direct OEM fit Mishimoto radiator is effortless, no cutting or modification is required. All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty

LIFETIME WARRANTY
Mishimoto Performance (MP), warrants all of its products under its ‘no questions asked’ limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer.

A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.

The purchaser’s remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid.
MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products.

ACCIDENT PROTECTION
Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.

FITMENT DISCLAIMER
All Mishimoto products are engineered to fit with OEM applications, as well as other Mishimotoproducts.

Includes:
-Mishimoto 3-Row Radiator
-Mishimoto Radiator Cap
-Magnetic Drain Plug
-Limited Lifetime Warranty

Sale!

MSD 8.5mm Super Conductor Plug Wire Set – 1989-2000 Mazda Miata – 32599

$79.99 $49.99

MSD 8.5mm Super Conductor Plug Wire Set – 1989-2000 Mazda Miata – 32599
$79.99

Application:
Mazda Miata 89-00 (NA/NB1)

Description:

MST Super Conductor Wire Sets are a must have upgrade. Their beefy wiring will help you keep your engine running strong. We have used these on Turbo and Supercharged vehicles as well. Their unique red/grey color way also dresses up the engine bay.

MSD’s 8.5mm Super Conductor wire sets have a special helically wound core that has just 40-50 ohms of resistance per foot–but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD’s 8.5mm Super Conductor wire sets come available in custom or universal-fit applications.