Showing all 9 results

Cam Angle Sensor CAS O-Ring Gasket – 1989-1997 Mazda Miata 9954-10-3801

$7.99

Cam Angle Sensor CAS O-Ring Gasket – 1989-1997 Mazda Miata 9954-10-3801
$9.99

Application:
Mazda Miata 89-97 (NA)

Description:

This is a genuine Mazda part. As these cars get old, some of these places will leak. This notorious O-Ring leaks directly onto your heater core hoses. Your hoses will turn into playdoh and rupture prematurely. MAKE SURE YOU CHECK THIS! You can check by just using your finger on the bottom side of the CAS when the engine is cool. Remember to mark the CAS position prior to doing the gasket replacement so that you don’t need to re-time your car. We have had good luck just using a sharpie or paint pen and marking a line

Sale!

Genuine Mazda Miata Valve Cover Gasket – 1989-2005 Mazda Miata

$49.99 $44.99

Genuine Mazda Miata Valve Cover Gasket – 1989-2005 Mazda Miata
$59.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

Genuine Mazda Valve Cover Gasket

DON’T CHEAP OUT ON AN AFTERMARKET! Aftermarket gaskets usually leak and make a mess. Do it once, and do it right! This gasket lasts many years, so just get the correct one from the beginning.
We have tried many and have gone back to ONLY using a Genuine Mazda Gasket for this.
Other items like belts and waterpumps are fine to use Gates. This isn’t one of those items.

EVERY YEAR CAR is different! Please select the appropriate car.
MAKE SURE YOU FOLLOW THE WRITEUP TO GET THE BEST RESULTS!
Sale!

Heater Core Firewall Grommets (Genuine Mazda) 2-Pack – 1989-2005 Mazda Miata 8871-61-219A

$19.99 $17.99

Heater Core Firewall Grommets (Genuine Mazda) – 1989-2005 Mazda Miata 8871-61-219A
$19.99 (2-Pack)

Application:
Mazda Miata 89-05 (NA/NB)

Description:

This is a genuine Mazda part. This is the grommet that protects the heater core from wearing a hole through the hard lines that protrude through the firewall. A lot of people have removed or reinstalled their heater cores and not switching these grommets can cause some huge issues. These help the heater core lines stay in the center of the hole and not letting it wear a hole in itself.

Sale!

IACV Idle Air Valve Seal Gasket – 1999-2005 Mazda Miata BP2Y-13-W89

$32.99 $27.99

IACV Idle Air Valve Seal Gasket – 1999-2005 Mazda Miata BP2Y-13-W89
$32.99

Application:
Mazda Miata 99-05 (NB)

Description:

This is a genuine Mazda part. As these cars get old, some of these places will leak. This gasket goes on your throttle body. It seals the IACV which controls your idle. A bad seal can cause a bad idle.

Injector O-Ring Gasket – 1989-2005 Mazda Miata 8574-13-253

$5.99

Injector O-Ring Gasket – 1989-2005 Mazda Miata 8574-13-253
$5.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

This is a genuine Mazda part. As these cars get old, some of these places will leak. These O-Rings can be the cause of that gas smell under the engine bay. These should not be re-used! Your car will require more than 1, order accordingly.

Sale!

Mass Air Flow Gasket – MAF Cork Seal – 1989-1993 Mazda Miata B6S7-13-211A

$15.99 $12.99

Mass Air Flow Gasket – MAF Seal – 1989-1993 Mazda Miata B6S7-13-211A
$19.99

Application:
Mazda Miata 1989-1993

Description:

This is a genuine Mazda part. As these cars get old, some of these places will leak. This gasket goes on the mass air flow sensor(to the intake). This is a special cork material seal which helps heat soak.

Sale!

PCV Grommet (on Valve Cover) – 1989-2005 Mazda Miata E301-13-338A

$4.49 $3.99

PCV Grommet (on Valve Cover) – 1989-2005 Mazda Miata E301-13-338A
$6.99

Application:
Mazda Miata 89-05 (NA/NB)

Description:

This is a genuine Mazda part. As these cars get old, some of these places will leak. This grommet hardens over time and can cause a small vacuum leak which can lead to idling issues. Sometimes pulling out the PCV will require you to replace this gasket. Make sure to have this on deck when you’re doing PCV service(just in case).

Water Neck (Thermostat Housing) O-Ring Seal – 1989-2005 Mazda Miata B61P-15-106A

$5.99

Water Neck (Thermostat Housing) O-Ring Seal – 1989-2005 Mazda Miata B61P-15-106A
$7.99

Application:
Mazda Miata 1989-2005

Description:

This is a genuine Mazda part. If you are doing your front service, or have a small leak, DON’T FORGET THIS O-RING! If you’re in there doing some work, might as well make sure you hit all the gaskets. This O-Ring fits on the Waterneck(to the head).